Water Treatment & Industrial RO

High-Pressure Pumps for Water Treatment & RO

The flow and pressure your water process needs. EHIK supplies low-flow, high-head pitot tube pumps and integrated packages, each matched to the water quality, inlet conditions and the transfer or RO feed requirements.

Blue EHIK pump and covered motor connected to pipework at a wastewater installation in Qingzhou.
EHIK wastewater pump installation at Qingzhou Boao, Shandong, China.

High Head at Low Flow

A single-stage pitot tube pump gives high head for small flows—an option for industrial transfer and membrane feed.

Continuous Liquid Delivery

The rotating design gives a continuous flow for transfer and process feed. EHIK matches the pump curve and drive to the treatment system's operating point and control range.

Pump, Seal and Drive from One Supplier

EHIK puts the pump, materials, seal and drive into one proposal. A skid can also include pipework, valves, instruments and controls.

Wastewater Retrofit / Qingzhou Boao

Wastewater Pumping
at Qingzhou.

EHIK replaced multistage centrifugal pumps for wastewater service at Qingzhou Boao in Shandong, China.

EHIK wastewater pump and motor at Qingzhou Boao, with adjacent pump sets, valves and process piping.
Qingzhou Boao, Shandong — wastewater pump and drive connected to the existing plant pipework.

EHIK Pump Sets in the Plant Pipework

At Qingzhou Boao, EHIK pumps replaced multistage centrifugal pumps in wastewater service. The photos show the EHIK pump and drive, the equipment next to it and the connections in the existing plant.

A new water-transfer installation is planned the same way: select for the real liquid and operating conditions, then plan the footprint, connection positions and access. For a retrofit, EHIK also reviews the equipment and pipework that will stay.

This project is wastewater service. The RO section below is a different membrane-feed application, with its own water-quality and pressure needs.

Discuss Your Application
EHIK pump with a yellow coupling guard and pressure gauge on a wastewater transfer line.
EHIK pump in wastewater transfer service.
EHIK pump sets and strainer in a mine-water pump room, with site staff.
EHIK pumps in mine-water service.

Define the Operating Conditions

Find Your Water-Pumping Task.

Industrial transfer, wastewater and membrane feed have different liquids and operating needs. EHIK selects the pump for the job the water does in your process.

Industrial Water Transfer

Send water to a process or raise pressure for the next step. EHIK matches the pump, drive and connections to the source, the pressure at the destination and the daily operating pattern.

We also check temperature, dissolved chemicals and suspended matter.

Wastewater Pumping

Wastewater is different in every process. Particle size and amount, corrosive substances, gas and temperature decide the pump materials, seal and wear-resistant options.

The Qingzhou installation above is a real wastewater project.

High-Pressure RO Feed

Feed the membrane stage with the flow and pressure the RO-system designer specifies. EHIK checks the pump against those requirements, the pretreated water and the expected operating range.

The pump feed flow is higher than the purified-water output. Please send us both values.

Existing-Pump Replacement

EHIK helps plan the replacement of an existing pump, based on the operating problem and the water requirements. We check the proposal against the process, inlet pressure and existing connections. Custom flanges can match your existing piping.

Discuss a Replacement

The RO Pumping Task

Pressure for the
Membrane Feed.

Reverse osmosis uses pressure to push water through a membrane. The pump gives the pressure; the membrane separates the water.

01 / Feed Preparation

Pretreated Water

Water quality and inlet supply

02 / Pumping Requirements

High-Pressure Pump

Required feed flow and pressure

03 / Separation

RO Membrane Stage

PermeateProduct-water stream

ConcentrateRetained-salt stream

Select on Membrane-Feed Flow

The RO designer’s feed flow and pressure define the pump requirements. EHIK matches the pump to them, including suction conditions and piping losses.

Define Each Pump's Role

With energy recovery, the main high-pressure pump and any booster pump do different jobs. Each pump is selected for its own flow and operating point.

Selection That Fits the Process

Match the Pump to Your Water.

EHIK's proposal covers the pump curve, materials and inlet needs for your real operating range.

Flow & Pressure

We select for the normal operating conditions and the expected minimum-to-maximum range. For RO, we also consider the membrane-feed need, the control range and changes in demand, water temperature and salinity.

Liquid & Materials

The water analysis decides the materials and seal. We review temperature, pH, chlorides, particles and chemicals—and cleaning liquids, if they pass through the pump.

Suction & Operation

For the NPSH check, we review the inlet supply, minimum tank level or feed pressure and suction pipework. We also need the running hours, start/stop sequence and any running and standby pumps.

Choose What’s Included

A Pump Set or an Integrated Package

Agree what EHIK supplies and how it connects to your treatment plant.

Pump & Drive

Pump, motor, coupling, guard and base for your liquid and operating requirements. EHIK provides selection, performance curves, outline drawings and technical support.

Explore Pitot Tube Pumps

Integrated Pump Skid

Pump and drive with the pipework, valves, instruments and controls you need. Process connections and signals are agreed with the treatment-system designer.

Explore Pump Skids

Water & RO FAQs

From Water Analysis
to Pump Selection

Start with the information you have. EHIK helps turn it into a pump selection and a clear proposal. We reply within 1 business day.

Is RO product-water output the same as pump flow?

No. The pump is selected on the membrane-feed flow, which is different from the permeate output. EHIK can help define the pump requirements in your RO system.

Does EHIK supply the complete membrane treatment plant?

No. EHIK supplies the pump or an integrated pump package. Pretreatment, membranes, energy recovery and other treatment equipment come from your system integrator.

Which material should I choose for saline water?

Salt and chloride levels, temperature and water chemistry decide the material. EHIK matches the materials and seal to the service—choosing a stainless-steel grade is not enough on its own.

Can EHIK help replace an existing pump?

Yes. Contact EHIK to discuss a replacement. We help find the cause of the problem, match the pump to the water requirements and check the fit with the existing connections.

Do I need a complete specification before contacting EHIK?

No. Contact EHIK directly. If you know the liquid properties, flow or pressure, please include them—you do not need all the details to start. EHIK provides selection, curves, outline drawings and technical support.

Start Your Water Project

Let's Discuss
Your Water Project.

Contact EHIK for industrial water transfer, wastewater or RO-feed pumping. We can help select the pump and materials and define a pump set or integrated package.

Send Your Flow and Head

Tell us the flow, head and liquid. We reply within 1 business day.
Only your name or company and your email are required.
Use the Full Inquiry Form

Replacing an existing pump? Email info@ehikpumps.com or message us on WhatsApp.

Pump Selection & Curves

A proposed pump configuration matched to your flow, pressure and operating range.

Outline Drawings & What’s Included

The equipment layout and a clear list of what’s included in the pump set or integrated skid.

Technical Support & Quotation

Help with liquid, materials and connection questions, then a quotation for the agreed equipment.