Integrated pumping solutions

Pump Skids for
Remote Oil & Gas Operations

Maintenance-free, unattended pumping. EHIK brings the pump, pipework and automatic controls together in a ready-to-connect package for water transfer, reinjection and well cleaning.

Discuss a Pump Skid
EHIK pump skid with two vertical vessels, a blue pump, connected pipework and a control cabinet.
One integrated package: pump, vessels, valves, pipework and controls.

Less work at the site

No dedicated concrete foundation or anchor bolts. Position the skid, connect the pipework and power, and start pumping.

Operate without a local crew

Maintenance-free packages with automatic level-based control for unattended operation in remote locations.

Relocate. Reconnect. Reuse.

When field needs change, move the whole package. The pump and its supporting equipment stay together.

One Base. Connected Equipment.

The 3D layout shows how pumps, vessels, pipework, valves and controls fit together on one skid.

EHIK three-dimensional pump-skid layout with pumps, vessels, connected pipework and control cabinets on a common base.
Example EHIK pump-skid layout · 3D model · click to enlarge
  1. Pump & Drive

    The pumping unit at the heart of the package.

  2. Vessels

    Process vessels integrated into the skid layout.

  3. Pipework & Valves

    Connected flow paths and operating valves.

  4. Control Panel

    Package controls arranged alongside the equipment.

  5. Common Skid Base

    One structure carrying the assembled equipment.

See what is inside a pump skid, part by part, in the EHIK Pitot Tube Pump Handbook.

The integrated package

One Supplier.
A Complete Pumping Package.

The pump and supporting equipment are put together before they reach the site. You agree on the included equipment and one set of connection points with one supplier.

Built Around Your Liquid and Process

EHIK skids are used for high-head, low-flow pumping in gas-field water transfer, reinjection and hot-water well cleaning.

For gas-field water, we also consider H₂S and CO₂, chlorides, scale-forming salts, solids and operating temperature—not only flow and pressure.

Pump and Drive

The pitot tube pump, motor, coupling and guard selected for your flow, pressure and available power supply.

Pipework and Valves

Skid pipework, operating valves and connections arranged for your liquid and process.

Instruments and Controls

Instrumentation, control panels, variable-speed control and operating signals for automatic operation.

Base and Supporting Equipment

A common skid base with vessels, seal-support equipment or an enclosure to suit the process and site.

A pump set combines a pump and drive. A pump skid brings the supporting process equipment and controls together around them.

Two EHIK pitot tube pumps on a common platform with integrated pipework, valves and instrumentation.
Pump package with integrated pipework, valves and instrumentation.

EHIK Pump Technology at the Core

EHIK designs and manufactures the pitot tube pump at the heart of the skid. Wear-resistant pickup tubes and a large threaded pickup-tube joint suit demanding liquids.

Explore Pump Components

Control & process integration

Automatic Operation
for Remote Sites.

Keep pumping without an operator on site. The package includes both the controls and the equipment.

Open EHIK enclosure with a green vessel, pressure gauge, instrumentation, valves and a control panel.
Inside the Automatic PackageVessel, instrumentation, valves and control panel within the enclosure.
Variable-speed control
Adjust pump speed to match the required flow and pressure.
Level-based start and stop
Start at high liquid level and stop at low level for unattended operation.
Connected to your process
Operating limits, protection functions and plant signals are set up for your process.

Pump Longer. Lower the Peak Flow.

If you transfer liquid in short batches, the peak flow can be high. Pumping the same volume over more hours can lower the peak flow and the back pressure in the pipeline.

Gas–liquid packages

Handle the Liquid.
Reduce Gas Venting.

Gas and liquid separate in vessels. The liquid passes through the pump while the gas follows a separate path. The two streams join again at the discharge, so less gas needs to be vented.

Gas–liquid package process flow. We select the equipment for your gas content, liquid properties and operating pressure.

Field projects & repeat orders

Built for the Field.
Chosen Again.

A desert installation followed by a repeat order. Gas-field water systems in operation. A practical answer to a shortage of well-cleaning trucks.

Different applications. Real installations.

From Water Transfer to Well Cleaning

These projects show how the package works in real operations—not just what the equipment looks like.

Shunan Gas Field installation with blue EHIK pumps, vessels, valves and instruments.

Shunan Gas Field · 2024

Gas-Field Water Transfer

EHIK pumps are integrated with field pipework, valves and instrumentation for gas-field water transfer. Here you can see how the pumps connect to the rest of the process system.

In the photo: pumps and drives, connected pipework and easy-to-reach valves at a working gas field.

EHIK pump used for hot-water well cleaning at Longhupao Oilfield in 2010.

Longhupao Oilfield, Daqing · 2010

Keep Well Cleaning Moving

There were not enough well-cleaning trucks, and more than 100 wells were waiting for hot washing. An EHIK pump skid did the work instead, cleaning more than 100 wells between October and December 2010.

Recorded Operating Benefits

Compared with a plunger-pump hot-washing truck, the 2010 project records show 30 liters (approx. 7.9 US gal) less fuel per well and two fewer crew members—a driver and a pump operator.

5–20 m³/h (approx. 22–88.1 US gpm)Flow
3–5 MPa (approx. 435–725 psi)Pressure
37 kW (approx. 50 hp)Motor power
Moxi field installation with multiple EHIK pumps and common pipework.
Moxi Development Area · 2019Gas-field water service. Multiple pump sets and common pipework are arranged together on the installation platform.
Chuanzhong 2024 installation with an EHIK pump, valves, instruments and a vessel beneath a site shelter.
Chuanzhong Oil & Gas Mine · 2024Gas-field water service. The field arrangement combines the pump, vessel, operating valves and instrumentation beneath a site shelter.
Crane lifting an EHIK pump skid with two yellow-topped vessels, pipework and a control cabinet onto a truck.
Zhongyuan Oilfield · 2024A complete pump skid with vessels, pipework and control cabinet, loaded for delivery.
EHIK-branded enclosed pump package in the workshop, with the pump set visible through an open door.
EHIK Enclosed Package · 2026An enclosed package in the workshop before delivery. The pump set and pipework sit inside the housing.

Installation & engineering support

Ready to Connect.
Built Around Your Site.

No dedicated concrete foundation or anchor bolts. Position the complete package, connect the process pipework and power supply, and start operation.

Complete EHIK pump skid on transport skates, with two vessels, connected pipework and a mobile crane alongside.
Complete pump package on transport skates, with lifting equipment alongside.

Designed for relocation & reuse

Move the Package.
Keep the Investment.

Move the pump and supporting equipment together as site needs change. Reuse the integrated package at another installation.

Disconnect. Reconfigure. Reconnect.
Planned connection points let you disconnect, rearrange or connect sections in parallel when the site changes.
Keep the equipment together
The common base carries the pump and supporting systems as one package. Reconnect the process pipework and power at the next site.
01

Process Connections

Inlet and outlet positions, pipe sizes, suction conditions and the equipment that will remain on site.

02

Power and Signals

Available power supply, motor and drive requirements, automatic controls and plant signal connections.

03

Space and Access

Skid dimensions, open-frame or enclosed construction, lifting access and connections for future relocation.

Open-Frame or Enclosed—Matched to the Site

Enclosed Packages

Equipment inside a housing that can be transported, with insulation, ventilation and temperature control chosen for the site.

See the Enclosed Equipment

Contact EHIK About Your Project

Start a conversation. EHIK will help define the package for your application. We reply within 1 business day.

EHIK Helps Clarify Your Requirements

  • Liquid properties, temperature, gas and solids
  • Flow, pressure and suction conditions
  • Site connections, power supply and installation layout
  • Equipment needed, delivery requirements and location

Get an EHIK Engineering Response

  • Pump selection and performance curves
  • Outline drawings and a defined list of equipment
  • Connection requirements and technical support
  • A quotation and delivery schedule for the selected package

We also offer on-site commissioning, remote support, spare parts and repairs.

Discuss a Pump Skid

Planning your package

Pump Skid FAQs

EHIK field pump skid with two pump drives, a vertical vessel, valves and connected pipework.
Field equipment on a common skid: pumps, a vessel, pipework and valves.
Does the skid need a concrete foundation or anchor bolts?

No. The complete skid does not need a dedicated concrete foundation or anchor bolts. Put the package in place and connect the process pipework and power supply.

Can an EHIK skid run unattended without routine maintenance?

Yes. EHIK offers maintenance-free, unattended packages for remote pumping applications, with automatic control for the process.

Can it replace or connect to equipment at our existing site?

EHIK builds the skid around your operating requirements, existing pipe connections, power supply and control needs. Connections can be made to match your existing piping, so the package is ready to connect when it arrives. We confirm the details for each site.

Can you supply both open-frame and enclosed skids?

Yes. Open-frame packages keep equipment readily accessible. Enclosed packages bring the equipment and supporting systems inside one enclosure, as shown in the Tarim project. The arrangement follows the installation environment and access requirements.

How are materials and seal-support equipment selected?

The liquid, temperature, gas, solids and corrosion conditions decide the choice of wetted parts, valves, seals and supporting systems. Pump material options include carbon steel, 304 and 316 stainless steel, duplex stainless steel and other materials for the service.

What determines delivery time?

Lead time depends on the pump, the supporting equipment and how much integration is needed. EHIK confirms the delivery schedule in the proposal.

Do we need a complete specification to request a proposal?

No. Contact EHIK to discuss your project. If you know the liquid properties, flow and pressure, please include them. We help define the operating requirements and provide selection, performance curves, outline drawings and technical support. Once we have your operating data, we send a quotation and technical proposal for the skid within 5 business days.

Engineering support

Contact EHIK About Your Pump Skid.

Contact EHIK for help with your pumping project. We provide pump selection, performance curves, outline drawings and technical support. We reply within 1 business day.

Send Your Flow and Head

Tell us the flow, head and liquid. We reply within 1 business day.
Only your name or company and your email are required.
Use the Full Inquiry Form